|
Post by rina8260 on Jan 9, 2024 4:23:23 GMT
Before installing new memory modules, check your motherboard's specifications to find out what type of RAM is supported and the maximum memory capacity and speed that can be installed. Before starting work, it is necessary to turn off the computer and disconnect it from the power source. The central unit casing then opens, allowing access to the inside of the computer. It is also a good idea to ground yourself before starting work by Country Email List touching the metal part of the housing to avoid electrostatic charges damaging the components. Installing the RAM module requires finding free slots on the motherboard. Modules should be inserted carefully, making sure that the tabs at the ends of the slot are open. The RAM memory is inserted at an angle of approximately degrees to the motherboard and gently pressed until a characteristic click is heard. The tabs should automatically close, locking the module in the slot. installed, close the computer case and reconnect all cables. After booting, the system should automatically detect the new hardware and configure it appropriately.
|
|